Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 2:21 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 34 posts ]  Go to page Previous  1, 2
Author Message
PostPosted: Sun Jul 14, 2019 2:21 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Nov 02, 2007 2:53 pm
Posts: 481
Location: Canada
Great looking build. A lot of people underestimate sapele because it's fairly inexpensive, but it can make a really good guitar.



These users thanked the author bftobin for the post: Mike Baker (Sun Jul 14, 2019 3:35 pm)
Top
 Profile  
 
PostPosted: Sun Jul 14, 2019 3:36 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Thank you.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
PostPosted: Mon Jul 15, 2019 10:19 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Thanks for taking my comment constructively, Mike. That doesn't happen much anymore.


Top
 Profile  
 
PostPosted: Mon Jul 15, 2019 11:18 am 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Barry Daniels wrote:
Thanks for taking my comment constructively, Mike. That doesn't happen much anymore.

Thank you.
I am not stupid. I know there are really good builders on here who will find things like that. Its the reason i'm here. You can't learn if you can;t take people's advice, and I really do appreciate it.
I have not got around to measuring yet; haven't had the time to get back to the build. But I will most likely order a slotted board from LMII and redo, if I can afford it. Right now my vehicle is down and it will take the money at this point. :P

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
PostPosted: Tue Oct 01, 2019 9:33 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu Feb 15, 2018 11:06 am
Posts: 274
First name: Roy L
Last Name: Smith
City: Apache Junction
State: Az
Zip/Postal Code: 85119
Country: USA
Focus: Repair
Status: Amateur
Thanks for sharing, enjoying it quite a bit. Curious about the gramil rather than a router. What did you use for the rosette and soundhole?

Roy


Top
 Profile  
 
PostPosted: Tue Oct 01, 2019 11:00 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Thanks.
Work has pretty much stopped on this. I was hoping to get it done this year, but home repairs before winter will stop it. I might be able to do a bit more work, particularly the neck, but finish will have to wait for next Spring.
As for why grammil instead of router, I prefer to use hand tools as much as possible. I do hand tool woodworking as a hobby, so it just came natural to do as much by hand as possible on acoustic building. For the sound hole and rosette, I built a very ugly circle cutter/grammil, and cut the rosette channel by hand with a chisel.
Thanks for replying and looking at my thread.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
PostPosted: Mon Mar 01, 2021 9:17 am 
Offline
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 1041
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
I realize this is a year-plus stale, and I'm curious if the project got resumed. Fascinating story so far.

_________________
Peter Havriluk


Top
 Profile  
 
PostPosted: Mon Mar 01, 2021 9:27 am 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
phavriluk wrote:
I realize this is a year-plus stale, and I'm curious if the project got resumed. Fascinating story so far.

My apologies. Life got in the way.
I also build outside, and weather stopped me (again). Spring is very close, so I should be a be to start back up on it then.
Thanks for being interested in this old thread. It is not dead, just dormant for a bit.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
PostPosted: Sat Sep 25, 2021 8:25 am 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
I apologize that I did not complete this thread with the rest of the process in pictures. This year I have been swamped with a ton of repairs to our home that have long needed attention, but financially could not be afforded until this year. And since I have been building this guitar for over three years, I thought the better part would be to knuckle under when I got the chance, and complete this build.
So here is the guitar, with me playing it.
The link below is to my build channel, on which the guitar build was documented in full. If you would like to check that out, please do.
I made a crap ton of mistakes, many of which are visible on the guitar under close inspection; it looks a lot better on video than in person.
But I am happy with sound and playability for a first acoustic build.
The video below is over 20 minutes long, so I don't expect you to watch it all, but if you are interested in what the guitar sounds like, you can hear it below. I can't get the video to embed, but here is the link.
https://youtu.be/4oB8wV9KL74

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 34 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com